Digital manual Hardness Tester
Model: IRHD Compact III
For measurement of Shore Hardness according to:
DIN ISO 48, NF T 46-003, ASTM D 1415, BS 903, Part. A26
Key Advantages of the IRHD Compact III
IRHD M (micro)
IRHD N (normal
0.1 IRHD M
0.1 IRHD N
Measurement of soft rubber, highly elastic material and material that can be plastically deformed
Minimum Material Thickness for IRHD M:
0.6 to 5 mm
Minimum Material Thickness for IRHD N:
6 to 10 mm
Centering device for the fast centering and
fixing of O-rings. For an O-ring thickness
of 0.8 mm to 5 mm or 4 mm to 20 mm
Automatic centering device
for the fast centering of
O-rings with a thickness of
0.8 to 5 mm or 4 to 20 mm
For the fast centering of
tube-like material, e.g. for
Please note that the devices "Barofix" and "Centrofix"
can easily be fitted on top of the measuring table of the IRHD Compact III.
If you have both, you can change them easily
depending on the measuring task you have on hand.
A common guide for the standardized procedure of the
proof of quality securing has been established by the ISO 9000. If a company
is going to be certified according to ISO 9000., it is obliged to control or
having controlled all its measures periodically in the scope of the surveillance
of measures. This kind of test is documented by us as the manufacturer.
As mentioned above, for the calibration you just need to send us the measuring head, not the complete system. Roteq will handle for you the packing/transport/insurance so that you get the items back in time with the calibration certificate as required by you.
Send mail to
questions or comments about this web site.